U-Boot 1.1.1 (Nov 13 2006 – 14:01:34) Marvell version: 1.4.2

DRAM CS[0] base 0×00000000 size 64MB
DRAM Total size 64MB
[8192kB@ff800000] Flash: 8 MB
Addresses 20M – 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M – 16M): Done
*** Warning – bad CRC, using default environment

Soc: MV88F5181 Rev 3
CPU: ARM926 (Rev 0) running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz

Init usb device.
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Hit any key to stop autoboot: 3 2 1 0
## Booting image at ff820000 …
Image Name: Linux-2.6.12.6-arm1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1490204 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum … OK
OK
## Loading Ramdisk Image at ff9a0000 …
Image Name: Ramdisk
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 5507627 Bytes = 5.3 MB
Load Address: 00800000
Entry Point: 00800000
Verifying Checksum … Bad Data CRC ** LOADER **
** MARVELL BOARD: RD-88F5181-POS-NAS LE

U-Boot 1.1.1 (Nov 13 2006 – 14:01:34) Marvell version: 1.4.2

DRAM CS[0] base 0×00000000 size 64MB
DRAM Total size 64MB
[8192kB@ff800000] Flash: 8 MB
Addresses 20M – 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M – 16M): Done
*** Warning – bad CRC, using default environment

Soc: MV88F5181 Rev 3
CPU: ARM926 (Rev 0) running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz

Init usb device.
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Hit any key to stop autoboot: 3 2 1 0
## Booting image at ff820000 …
Image Name: Linux-2.6.12.6-arm1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1490204 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum … OK
OK
## Loading Ramdisk Image at ff9a0000 …
Image Name: Ramdisk
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 5507627 Bytes = 5.3 MB
Load Address: 00800000
Entry Point: 00800000
Verifying Checksum … Bad Data CRCя ** LOADER **
** MARVELL BOARD: RD-88F5181-POS-NAS LE

U-Boot 1.1.1 (Nov 13 2006 – 14:01:34) Marvell version: 1.4.2

DRAM CS[0] base 0×00000000 size 64MB
DRAM Total size 64MB
[8192kB@ff800000] Flash: 8 MB
Addresses 20M – 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M – 16M): Done
*** Warning – bad CRC, using default environment

Soc: MV88F5181 Rev 3
CPU: ARM926 (Rev 0) running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz

Init usb device.
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Hit any key to stop autoboot: 3 2 1 0
## Booting image at ff820000 …
Image Name: Linux-2.6.12.6-arm1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1490204 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum … OK
OK
## Loading Ramdisk Image at ff9a0000 …
Image Name: Ramdisk
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 5507627 Bytes = 5.3 MB
Load Address: 00800000
Entry Point: 00800000
Verifying Checksum … Bad Data CRCя ** LOADER **
** MARVELL BOARD: RD-88F5181-POS-NAS LE

U-Boot 1.1.1 (Nov 13 2006 – 14:01:34) Marvell version: 1.4.2

use Data::Dumper;
my $data = {
‘country’ => ‘Россия’,
‘city’ => ‘Москва’,
‘terminal’ => ”,
‘airport’ => ‘Домодедово’,
‘code’ => ‘DME’
};

my $dump = Dumper($data);
$dump =~ s/\\x\{([a-f0-9]{2,})\}/chr(hex($1))/ge;
print $dump;

Starting kernel …